MTL4624S SOLENOID/ALARM DRIVER switch operated with 24V override, by a volt-free contact or a floating logic signal.

MTL4624S SOLENOID/ALARM DRIVER switch operated with 24V override, by a volt-free contact or a floating logic signal.

The MTL4624S enables an on/off device to be controlled by a volt-free contact or a floating logic signal. It can drive loads such as solenoids,
alarms, LEDs and other low power devices. By connecting a second voltage, the output can be disabled to permit, for example, a safety
system to override a control signal.

SPECIFICATION
Number of channels
One
Output
Minimum output voltage: 9.6V at 70mA
Maximum output voltage: 24V from 180Ω
Current limit: 70mA
Output ripple
< 0.5% of maximum output, peak-to-peak
Control input (must be fully-floating)
Suitable for switch contacts or an opto-isolator
0 = input switch closed, transistor on or < 1.4V applied 1 = input switch open, transistor off or > 4.5V applied
Override input
A 24V logic signal applied across the terminals allows the solenoid/
alarm to be operated by the control input. If it is disconnected, the
solenoid/alarm is off.
0 = < 2.0V applied across terminals 8 & 9 1 = > 9.0V applied across terminals 8 & 9
(nominal switching point 4.5V)
LED indicators
Green: power indication
Yellow: output status, on when output active
Maximum current consumption
125mA at 24V dc
Power dissipation within unit
1.4W with typical solenoid valve, output on
1.9W worst case

Model for example
MTL4604
MTL4610
MTL4611
MTL4614
MTL4614D
MTL4616
MTL4617
MTL4619H
MTL4619L
MTL4621
MTL4623
MTL4623L
MTL4623R
MTL4624
MTL4624S
MTL4626
MTL4627
MTL4628
MTL4641
MTL4641A
MTL4641AS
MTL4641S
MTL4644
MTL4644A
MTL4644AS
MTL4644D
MTL4644S
MTL4646
MTL4646Y
MTL4649
MTL4649Y
MTL4675
MTL4676-RTD
MTL4676-THC
MTL4632